Ubuntu 14.04 LTS

This document describes installation from source. If you want to build a deb, see Packaging Debian.

Installing Dependencies

apt-get update
apt-get install \
   git autoconf automake libtool make libreadline-dev texinfo \
   pkg-config libpam0g-dev libjson-c-dev bison flex python3-pytest \
   libc-ares-dev python3-dev python3-sphinx install-info build-essential \
   protobuf-c-compiler libprotobuf-c-dev \
   libsnmp-dev perl libcap-dev libelf-dev

FRR depends on the relatively new libyang library to provide YANG/NETCONF support. Unfortunately, most distributions do not yet offer a libyang package from their repositories. Therefore we offer two options to install this library.

Option 1: Binary Install

The FRR project builds some binary libyang packages.

RPM packages are at our RPM repository.

DEB packages are available as CI artifacts here.

Warning

libyang version 2.1.128 or newer is required to build FRR.

Note

The libyang development packages need to be installed in addition to the libyang core package in order to build FRR successfully. Make sure to download and install those from the link above alongside the binary packages.

Depending on your platform, you may also need to install the PCRE development package. Typically this is libpcre2-dev or pcre2-devel.

Option 2: Source Install

Note

Ensure that the libyang build requirements are met before continuing. Usually this entails installing cmake and libpcre2-dev or pcre2-devel.

git clone https://github.com/CESNET/libyang.git
cd libyang
git checkout v2.1.128
mkdir build; cd build
cmake --install-prefix /usr \
      -D CMAKE_BUILD_TYPE:String="Release" ..
make
sudo make install

Building & Installing FRR

Add FRR user and groups

sudo groupadd -r -g 92 frr
sudo groupadd -r -g 85 frrvty
sudo adduser --system --ingroup frr --home /var/run/frr/ \
   --gecos "FRR suite" --shell /sbin/nologin frr
sudo usermod -a -G frrvty frr

Compile

Clone the FRR git repo and use the included configure script to configure FRR’s build time options to your liking. The full option listing can be obtained by running ./configure -h. The options shown below are examples.

git clone https://github.com/frrouting/frr.git frr
cd frr
./bootstrap.sh
./configure \
    --prefix=/usr \
    --includedir=\${prefix}/include \
    --bindir=\${prefix}/bin \
    --sbindir=\${prefix}/lib/frr \
    --libdir=\${prefix}/lib/frr \
    --libexecdir=\${prefix}/lib/frr \
    --sysconfdir=/etc \
    --localstatedir=/var \
    --with-moduledir=\${prefix}/lib/frr/modules \
    --enable-configfile-mask=0640 \
    --enable-logfile-mask=0640 \
    --enable-snmp=agentx \
    --enable-multipath=64 \
    --enable-user=frr \
    --enable-group=frr \
    --enable-vty-group=frrvty \
    --with-pkg-git-version \
    --with-pkg-extra-version=-MyOwnFRRVersion
make
sudo make install

Install FRR configuration files

sudo install -m 775 -o frr -g frr -d /var/log/frr
sudo install -m 775 -o frr -g frrvty -d /etc/frr
sudo install -m 640 -o frr -g frrvty tools/etc/frr/vtysh.conf /etc/frr/vtysh.conf
sudo install -m 640 -o frr -g frr tools/etc/frr/frr.conf /etc/frr/frr.conf
sudo install -m 640 -o frr -g frr tools/etc/frr/daemons.conf /etc/frr/daemons.conf
sudo install -m 640 -o frr -g frr tools/etc/frr/daemons /etc/frr/daemons

Tweak sysctls

Some sysctls need to be changed in order to enable IPv4/IPv6 forwarding and MPLS (if supported by your platform). If your platform does not support MPLS, skip the MPLS related configuration in this section.

Edit /etc/sysctl.conf and uncomment the following values (ignore the other settings):

# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
#  Enabling this option disables Stateless Address Autoconfiguration
#  based on Router Advertisements for this host
net.ipv6.conf.all.forwarding=1

Reboot or use sysctl -p to apply the same config to the running system.

Add MPLS kernel modules

Warning

MPLS is not supported on Ubuntu 14.04 with the default kernel. MPLS requires kernel 4.5 or higher. LDPD can be built, but may have limited use without MPLS. For an updated Ubuntu Kernel, see http://kernel.ubuntu.com/~kernel-ppa/mainline/

Ubuntu 18.04 ships with kernel 4.15. MPLS modules are present by default. To enable, add the following lines to /etc/modules-load.d/modules.conf:

# Load MPLS Kernel Modules
mpls_router
mpls_iptunnel

And load the kernel modules on the running system:

sudo modprobe mpls-router mpls-iptunnel

Enable MPLS Forwarding

Edit /etc/sysctl.conf and the following lines. Make sure to add a line equal to net.mpls.conf.eth0.input for each interface used with MPLS.

# Enable MPLS Label processing on all interfaces
net.mpls.conf.eth0.input=1
net.mpls.conf.eth1.input=1
net.mpls.conf.eth2.input=1
net.mpls.platform_labels=100000

Install the init.d service

sudo install -m 755 tools/frr /etc/init.d/frr

Enable daemons

Open /etc/frr/daemons with your text editor of choice. Look for the section with watchfrr_enable=... and zebra=... etc. Enable the daemons as required by changing the value to yes.

Start the init.d service

/etc/init.d/frr start

Use /etc/init.d/frr status to check its status.